www.pruett-schaffer.com
|
PRODUCT NUMBER |
PRODUCT NAME |
|
99-1-2 |
Cream Boiler Paste |
|
GENERAL
DESCRIPTION Pruett-Schaffer’s
#99-1-2 Boiler Paste is a highly filled oil-based caulking-like compound
formulated with Lead & Chromate free
pigments and drying &
non-drying oils & modified varnish .
It has very good flexibility, water & heat resistance. It forms a
water tight seal between cast iron parts for boiler manufacturing. Shrinkage
is minimal with this product. APPLICATION
METHOD Apply by caulking gun or pressurized
caulk gun apparatus. Can be applied manually by trowel. |
CLEANUP Clean
equipment with mineral spirits before the film dries. ENVIRONMENTAL This
product contains no solvent, lead or chromate. |
PHYSICAL
PARAMETERS VOC, ASTM D-3960:
0.09 lb./gal WEIGHT PER GALLON,
ASTM D-1475: 16.15 lbs. +/- 1.0 NONVOLATILE: By weight: 99.4 +/- 3.0 % By volume: 98.6 +/-
1.5% Dry tack free: Overnight FLASH POINT, TAG
CC: Not Applicable VISCOSITY: 125,000
+/- 25,000 CPS STORAGE This product may separate slightly on
storage. High temperatures may
aggravate separation. |
|
THIS INFORMATION RESULTS FROM TESTS CONDUCTED IN A LABORATORY UNDER LABORATORY CONDITIONS. DIFFERENT RESULTS MAY BE OBTAINED IN COMMERCIAL USE OF THIS PRODUCT UNDER FACTORY OR FIELD CONDITIONS. PRUETT-SCHAFFER MAKES NO WARRANTY CONCERNING THE SUITABILITY OF THIS PRODUCT FOR THE END USE CONTEMPLATED BY THE BUYER, EXCEPT THAT THE PRODUCT SHALL BE IN COMPLIANCE WITH THE TECHNICAL SPECIFICATIONS PRESENTED HEREIN. |
||
QC IDENTIFIER: E26
REVISED 04-22-03