www.pruett-schaffer.com
|
PRODUCT NUMBER |
PRODUCT NAME |
||
|
45-4 (TC-1600) |
GRAY VINYL TOUCHUP COMPOUND |
||
|
GENERAL DESCRIPTION Pruett-Schaffer’s
#45-4 Gray Touchup Compound is a fast air drying, solvent based, vinyl
paint. It is designed as a high
gloss, brush applied finish coat for a variety of exterior or interior
maintenance applications. It exhibits
good abrasion and corrosion resistance, color fastness, vapor, chemical,
moisture barrier, and excellent exterior durability. RECOMMENDED
USES Use
to protect metal conduit and fittings from corrosion in aggressive
environments where chemicals, acid, alkali, salt, water, fuels, and oils are
present. It may also be used as a
vapor, moisture, or chemical barrier for exterior conduit and fitting
protection. This coating exhibits excellent flexibility and resistance to
impact cracking, and has very good adhesion to difficult metal substrates. It
is not recommended for immersion service. SURFACE
PREPARATION Remove all oil, grease or foreign
substances with chemical, detergent or solvent cleaning. |
THINNING Thin
if necessary for spraying with methyl isobutyl ketone. Add a little solvent at a time to the
mixed system with constant gentle agitation to a maximum of 5% by volume. APPLICATION
EQUIPMENT May
be applied by brush. Apply to 3-4
mils dry film thickness (15-20 mils wet) . DRYING
TIME Dries
tack free in 15-30 minutes at 77 0F;
dry to light handling in 1-2 hours; ultimate cure in 3-5 days. |
CLEANUP Clean
equipment with any Ketone
solvent before the film dries. ENVIRONMENTAL This
product contains no lead, chromate, or zinc. PHYSICAL
PARAMETERS WEIGHT PER GALLON,
ASTM D-1475: 8.54 lbs INITIAL GLOSS, 600
, ASTM D-523: 50-70 VISCOSITY, ASTM
D562: 67-75 Krebs Units Non Volatile by
Weight: 35.3 +/- 2% Non Volatile by
Volume: 20.3 +/- 1% VOC: 5.53 #/gallon Theoretical Coverage:
326 sq.feet/mil FLASH POINT, TAG
CC: > 25 0F, as
shipped |
|
|
THIS INFORMATION RESULTS FROM TESTS CONDUCTED IN A LABORATORY UNDER LABORATORY CONDITIONS. DIFFERENT RESULTS MAY BE OBTAINED IN COMMERCIAL USE OF THIS PRODUCT UNDER FACTORY OR FIELD CONDITIONS. PRUETT-SCHAFFER MAKES NO WARRANTY CONCERNING THE SUITABILITY OF THIS PRODUCT FOR THE END USE CONTEMPLATED BY THE BUYER, EXCEPT THAT THE PRODUCT SHALL BE IN COMPLIANCE WITH THE TECHNICAL SPECIFICATIONS PRESENTED HEREIN. |
|||
QC IDENTIFIER: E26
REVISED 05-27-2005